Turn Off the Camera and Turn on Again
The following warnings are displayed in the LCD monitor:
Warning | Description |
---|---|
(red) | Low battery. Accuse the battery or insert a fully-charged spare battery. |
(blinks red) | Battery exhausted. Charge the battery or insert a fully-charged spare bombardment. |
(displayed in red with red focus frame) | The camera tin can not focus. Use focus lock to focus on another bailiwick at the same distance, then recompose the picture |
Aperture or shutter speed displayed in red | The subject is too vivid or too night and the picture volition be over- or nether-exposed. Use the wink for additional lighting when taking photographs of poorly-lit subjects. |
Photographic camera malfunction. Turn the camera off and and so on again. If the message persists, contact a FUJIFILM dealer. | |
Turn the photographic camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a FUJIFILM dealer. | |
The memory card is incorrectly formatted. Employ the photographic camera to format the menu. | |
| |
The memory card is locked. Unlock the bill of fare. | |
| |
The retention card is full and pictures can not exist recorded. Delete pictures or insert a memory carte with more free space. | |
The shutter can only be released when a memory card is inserted. Insert a memory card. | |
| |
| |
The photographic camera has run out of frame numbers (electric current frame number is 999–9999). Format the retention bill of fare and select RENEW for FRAME NO.. Take a moving picture to reset frame numbering to 100–0001, then select CONTINUOUS for FRAME NO.. | |
| |
An attempt was made to delete or rotate to a protected picture. Remove protection and try again. | |
The picture is damaged or was non created with the camera. | |
Red-heart removal can not exist applied to the selected picture. | |
Carmine-eye removal tin not be applied to movies. | |
An try was made to rotate a picture that tin not be rotated. | |
Movies tin can not be rotated. | |
The DPOF print lodge on the electric current retention card contains more than than 999 images. Copy the pictures to a figurer and create a new print club. | |
The flick can not exist printed using DPOF. | |
Movies tin non be printed using DPOF. | |
A connectedness error occurred while pictures were beingness printed or copied to a computer or other device. Confirm that the device is turned on and that the USB cable is continued. | |
Printer out of paper or ink, or other printer fault. Check printer (see printer manual for details). To resume press, turn the printer off then turn it back on. | |
Printer out of paper or ink, or other printer error. Check printer (see printer transmission for details). If printing does not resume automatically, press MENU/OK to resume. | |
An effort was fabricated to impress a flick, a film non created with the camera, or a picture in a format non supported by the printer. Movies and some pictures created with other devices tin can not be printed; if the picture is a still picture created with the camera, check the printer manual to ostend that the printer supports the JFIF–JPEG or Exif–JPEG format. If it does non, the pictures can not be printed. | |
Turn the camera off and expect for it to absurd. Mottling may increment in pictures taken when this alert is displayed. |
Source: https://fujifilm-dsc.com/en/manual/x-t10/appendix/warning_messages/index.html#:~:text=Turn%20the%20camera%20off%20and,persists%2C%20contact%20a%20FUJIFILM%20dealer.&text=Turn%20the%20camera%20off%2C%20remove,persists%2C%20contact%20a%20FUJIFILM%20dealer.
0 Response to "Turn Off the Camera and Turn on Again"
إرسال تعليق